GOVERNMENT CONTRACT OPPORTUNITY
==============================

Notice ID: FTWMCCG61D653701
Title: PURCHASE AND INSTALL OF MULTIPLE COMPONENTS ON A 2026 FORD F-350
Agency: GENERAL SERVICES ADMINISTRATION
Sub-Agency: FEDERAL ACQUISITION SERVICE
Office: GSA/FAS/TTL/QMD/MCC

TYPE & CLASSIFICATION
---------------------
Opportunity Type: Combined Synopsis/Solicitation
NAICS Code: 811111
PSC Code: 2310
Set-Aside: Full & Open Competition

LOCATION
--------
State: DC
City: WASHINGTON
ZIP: 20405

KEY DATES
---------
Posted: 2026-10-15T15:49:16.000Z
Response Deadline: 2026-10-30T20:30:00.000Z
Status: Active

DESCRIPTION
-----------
This requirement is for the installation of necessary components on a 2026 FORD F-350 (Tag number G61D6537 , VIN# 1FD8W3FN9TEE72593). All equipment must be covered by the manufacturers warranty. All items shall include standard warranty. Repairs will be completed in accordance with industry standards. Vendors shall be following all EPA and OSHA standards and requirements. SDS and any other required documents must be on site. Vendors must be properly insured to cover any losses for GSA vehicles that are in their shop. Valid business license(s) is required in accordance with state and local guidelines. All employees of selected vendor must be paid in accordance with local Department of Labor established wages. Please see Bill of Materials (BOM). BOM: 60 Inch Cab to Axle Front Winch, Mount, Guard, Lights WARN Winch and Mount -Warn16.5 Winch- WARN PN# WARN 68801 - Winch Mounting Bracket -WARN PN# 108001 -Winch Carrier- WARN PN# 107651 -Winch Guard- WARN PN# 109580 Light Bar LED 2 row light bar -Approximately 20 inches -Wired to upfitter switches LED Amber Strobe -Mounted in front grill and rear of utility bed -Wired to upfitter switch Go light -Mounted on driver side on material rack -Two remotes -LED lights Body mounted work lights -LED light -Mounted at rear of utility bed Truck Body Cab length running boards. Utility Body Body- CM brand TM body or equivalent - Spring mounted front mount - Final overall ground clearance to match lowest point on truck cab. Roughly 22 inches. -1 st Front vertical compartment - 2each 8-inch-tall heavy duty slide out drawers -mounted at bottom of bin -3/16 th floor deck -Compartment lights in each bin -Utility Box compartment lighting -In floor Tiedown -E-track -Bed liner -Additional storage boxes on top side of PS and CS of First vertical bin. - Full Length First vertical bin - Full width First vertical bin - Box must not cover headache rack brake lights - Doors must open up for access. - Must be equipped with struts to hold open door - Heavy Duty Spare Tire Rack and Cab protector screen -Rack must be removable to facilitate vehicle cab removal. Hitch and Bumper -Class 5 receiver hitch Rated at no less the 18,000lbs -Recessed bumper -Trailer Electrical plug wired to SAE J2863 standard - Back up camera -Centrally located and protected rear view camera mount

---
Source: Gov Contract Finder
Canonical URL: https://govcontractfinder.com/contracts/purchase-and-install-of-multiple-components-on-a-2026-ford-f-ftwmccg61d653701
Official Source: SAM.gov
Official URL: https://sam.gov/workspace/contract/opp/81c2095f52dc40cd91c9a397dfb25193/view